Organizing November Community Hangout and NethCamp
Good, the list of participants is growing up: @Jim ? @ironsky @mabeleira @giacomo @sitz @willzen @Uros_Benkic @apradoc @Nas and me Time looks decided: 13.30 GMT
View ArticleNethServer multi wan captiva portal(NethServer hotspot config)
I think that you need an external radius server to authenticate users of the captive portal.
View ArticleBug when assigning a new zone on an interface in the network module
Custom zones are not intended to be used that way. Zones are behind an existing standard zone.
View ArticleBug when assigning a new zone on an interface in the network module
Arg...I'm seeing nothing in the wiki, neither in the HowTo filippo_carletti : Custom zones are not intended to be used that way. Zones are behind an existing standard zone. Howto a custom zone...
View ArticleBug when assigning a new zone on an interface in the network module
http://docs.nethserver.org/en/latest/firewall.html?highlight=zone#firewall-objects Honestly, I don't know how to explain the concept better. An example could be:you have a "section" of your green...
View ArticleBug when assigning a new zone on an interface in the network module
Sincerely, I had understanded the concept as a totally isolated zone.Where all rules must be specificaly open or to be set up.And nothing in this zone has a preset rules to access internet ( the green...
View ArticleBug when assigning a new zone on an interface in the network module
What do you think about this?: By default to have one more zone ( ie Black )Black | Green > Blue > Orange > Red Where the Black zone has absolutely no preset rules.And treat this Black zone...
View ArticleMultiple physical ports for one LAN zone
I thought bridging was for joining multiple networks. I don't get any connectivity on the additional ports when I use bridging. Here's a screenshot of the config before setting up the bridge: Pasted...
View ArticleFew questions about shorewall
Re-read the doc: The firewall implements two default policies editable from the page Firewall rules -> Configure: Allowed: all traffic from green to red is allowedBlocked: all traffic from green to...
View ArticleMultiple physical ports for one LAN zone
You're doing everything right, AFAICS.Could you run tcpdump on eth2 or eth3 (tcpdump -nn -p -i eth2) while pinging?Do you see lines logged in /var/log/firewall.log?
View ArticleFew questions about shorewall
Jim: I mean it's DROP or REJECT? Most of block rules are drop and are logged. See /etc/shorewall/policy for details.
View ArticleMultiple physical ports for one LAN zone
I have the same behavior with Vlan.I had opened a thread for this... community.nethserver.org VLANs not working Hi, I had set up a Nethserver Firewall/Gateway, on a Dell PowerEdge T110 II. It has 3...
View ArticleMultiple physical ports for one LAN zone
filippo_carletti: Could you run tcpdump on eth2 or eth3 (tcpdump -nn -p -i eth2) while pinging? Pasted image722x266 38.6 KB Firewall.log: Nov 6 11:41:22 localhost kernel: Shorewall:OUTPUT:REJECT:IN=...
View ArticleBug when assigning a new zone on an interface in the network module
Jim: Sincerely, I had understanded the concept as a totally isolated zone. I would agree with this. Here's a screenshot from "the other" router that I use quite a bit: Interfaces are assigned to zones.
View ArticleIntroducing new members on community - 20 Oct 15
Hi Guys What brings me to nethserver is the quest for a simple router (with extendable modules), that supported my hardware. I'm currently running a small Ubuntu Xen server and I've been looking to...
View ArticleLooking for native English speakers
I'm a programmer, therefore even though I speak English, I can't spell to save my life!
View ArticleNethServer mug?
Hi, There's no mug ? It may be ideal to add a mug... At the front of Nethserver gui.The mouse in the right hand... The mug in the left
View ArticleHowTo install NethServer on ProxMox OpenVZ container
ok. can u share your configuration o screen shot
View Article